|
.
|
|
|
Long Range
Wireless Controls. Lo2 to 10 Miles ( 3 to 16 km )
Up to 10 miles
of line-of-sight range Wireless controls RF frequency: 27.255 MHz Up
to two miles of line-of-sight range with handheld devices Over 64,000
codes Code Setting Method: DIP switch programming
Complete RF supervision, field enabled, Fully supervised (loop status,
low battery, link integrity)
Loop Response Time: 500 msec
Applications
Detailed Specifications
 |
937001
Receiver 1-Channel. When the receiver detects a signal from its
companion transmitter, it will verify the digital code, activate the
correct output channel, and trigger the remote device connected to
the receiver. Weather-Resistant Case
-
Form C Output 1A. 30V
-
Power On and RF Activity
Indicators
-
4.25 W x 6.25 H x 2.5 D
Antenna not supplied ( to order)
|
937001
|
|
|
937004
Receiver 4-Channel. When the receiver detects a signal from its
companion transmitter, it will verify the digital code, activate
the correct output channel, and trigger the remote device
connected to the receiver. Weather-Resistant Case
-
Form C Output 1A.
30V
-
Power On and RF Activity
Indicators
-
4.25 W x 6.25 H x 2.5 D
Antenna not supplied ( to order)
|
937004
|
 |
937016
Receiver 16-Channel. When the receiver detects a signal from its
companion transmitter, it will verify the digital code, activate
the correct output channel, and trigger the remote device
connected to the receiver. Power On and RF Activity
Indicators
-
Open Collector Outputs
100mA
-
RF frequency: 27.255 MHz
-
7.9 W x 6.25 H x 1.25 D
Antenna not supplied ( to order)
|
937016
|
|
|
937101 Stationary 1-Channel Transmitter . When triggered
with an external switch, the transmitter will send a
digital encoded, FSK modulated, signal to its companion
receiver. The receiver will verify the digital code, activate
its output, and trigger the remote device.
Weather-Resistant Case
-
RF transmit LED
-
Accepts N/O or N/C inputs
-
4.25 W x 6.25 H x 2.5 D
Antenna not supplied ( to order)
|
937101
Top
|
|
|
937104 Stationary 4-Channel Transmitter . When triggered
with an external switch, the transmitter will send a
digital encoded, FSK modulated, signal to its companion
receiver. The receiver will verify the digital code, activate
its output, and trigger the remote device.
Weather-Resistant Case
-
RF transmit LED
-
Accepts N/O or N/C inputs
-
4.25 W x 6.25 H x 2.5 D
Antenna not supplied ( to order)
|
937104
|
 |
937202 Portable
Transmitter 2 Channels
Configurable as
stationary transmitters.
Up to two miles of
line-of-sight range.
configurable as
2-button panic
transmitters.
configurable as
2-channel continuous
output transmitter
Includes belt clip.
Code Setting Method: DIP switch programming
Dimensions : 2.5in W x 5.5
in H x 1.30in D , Antenna
7in included
Powered by two 9V
batteries (supplied)
|
937202
|
 |
937204 Portable Transmitter 4 Channels
Configurable as
stationary transmitters.
Up to two miles of
line-of-sight range.
configurable as
4-button panic
transmitters.
configurable as
4-channel continuous
output transmitter
Includes belt clip.
Code Setting Method: DIP switch programming
Dimensions : 2.5in W x 5.5
in H x 1.30in D ,
Antenna
7in included,
Powered by two 9V
batteries (supplied)
|
937204
|
 |
937000
Antenna for transmitters and receivers
Eight-inch rubber duck
style
50 ohm UHF connector
included
0.65 W x 9 H x .65 D
inches |
937088
|
 |
937000
Antenna for
transmitters and receivers
Three-foot whip style 50
ohm,
9 feet of coax cable
included
U bolt included for post
mounting
2.25 W x 39 H x 2 D |
937099
Top |
 |
12VDC
Power adaptor, 2000 mA
12VDC @ 2000 mA
120 VAC input |
937112
|
 |
12 Amp Power relay
277 VAC SPST
General purpose
12VDC coil 60 mA.
Plug-in relay and DIN mount |
931212
|
 |
Momentary-to-Toggle (Bi-Stable) Switching
Converter
The LATCH module
device designed to allow arming/disarming
momentary, two wire start stop circuit, or with hand-held
wireless remote controls.
Momentary closure will latch the
relay.
A subsequent momentary closure will unlatch the
relay.
The relay provides
N.O. and N.C. contacts, |
934757
|
|
|
Single shot control relay
Replaces the normal ON
to
one pulse circuit.
Momentary or continuous closure sends one pulse
of 3 seconds
12
, 24 VDC Current drain - less than 0.04mA (pulse), 30 mA
3 seconds adjustable
Relays SPDT. 10A. 125 VAC |
934121
|
Top
|
