|
 |
|
|
Momentary-to-Toggle (Bi-Stable) Switching
Converter
The Toggle module is an auxiliary device
designed to allow easy and reliable arming/disarming momentary, two
wire start stop circuit, or with
hand-held wireless remote controls. It may be looked upon as an
easy-to-use, cost-effective "momentary-to-toggle (bi-stable)"
switching converter.
Momentary closure of the terminals A1 and
S will latch the
relay.
A subsequent momentary closure of the contacts will unlatch the
relay.
Reset the Toggle relay by removing power from
terminal A1 or A2
The relay provides
N.O. and N.C. contacts, and can therefore be used with a wide
variety of control applications.
- Replaces the normal ON/OFF with an electronic
bi-stable circuit
- The relay provides N.O. and N.C. outputs.
- Operating power - 12, 24VDC or
24, 110, 220VAC
- Current drain - less than 1mA (unlatched), 30 mA
(latched).
- Relays switching capability –
15A / 250VAC.
- UL
Listed
E308660
- DIN mount
|
 |
|
 |
Example on Receiver Operation:
Output Mode
Settings:
| Momentary |
Press=On, Release=Off
|
| Toggle/
Latch: |
Press=On, Press again=Off
|
|
Time interval |
Press=On,
Release= Off after time lapse
|
Applications:
Lighting control, irrigation, gate, traffic
management |
|
|
|
Home
Cart 
