Electrodepot  
 

     GENERAL PURPOSE SINGLE CHANNEL INDUSTRIAL WIRELESS CONTROL

Special order include:
1  Transmitter   937111
1  Receiver   937011
1  931512 power relay 12VDC
2  Antennas, 21
" w connector
2 plug-in adapters 120V-12V
2 NEMA3  metallic enclosure

1  Wiring Diagram

     KIT  937811    $1,299.99  Special Order

 Wiring diagram example
Wireless diagram electrodepot

 PERFORMANCE
5 Miles ( 8 km ) line of sight, 
2000 feet (600m) inside partially obstructed
Optional ex range 20 Miles ( 32 km ) line of sight

 OPERATION: Factory pre programmed
Pre programmer devices for a single channel circuit application,
On contact closure ON (Low) sends a pulse to start the process,
On contact break OFF (Stop) sends a pulse to stop the process,

 SPECIFICATIONS  
Operating Voltage: 12 to 15. VDC
Operating Temperature: -4° to +140° F (-20° to +60° C)
 Receiver Type:  16 Bit Digital  Superheterodyne -118 dB 
 Transmitter  16 Bit encoded, dry contact input
 Codes:  65,536 DIP switch programming
Current Drain Receiver  25 mA, standby, 145 mA operation
Transmitter 1 mA standby, 2 Amp 7 sec.
Data process  Encoded Loop response 500 ms.
Relay Output 10 Amp max 30VDC -  250VAC N/0 and N/C
Antenna  50 Ohms Quarter Wave, Antenna optional
Frequency  27,255 MHz  industrial
Enclosure size ea  24.13 x 19.05 x 8.89 cm / 9.5  x 7.5 x 3.5 inch
   

 Optional Accessories


Power Supply Solar panel Kit 12V Time Clock Mechanical Float Switch 931512 (included)
   

DISCLAIMER:  Contact a licensed professional         Warning: Radio control equipment is not to be used in life safety