|
|
carbon monoxide sensors
CO
|
930450
|
- SPDT alarm relay
- LED for operating status
- 12-24 VDC / 13-24 VAC Input
- Flush or surface mount
- Long life sensor
- All units individually calibrated
- Listed to UL Standard 2075 for carbon monoxide detectors.
- Tested to UL Standard 2034 for carbon monoxide detectors.
- Surface mounts to a wall over a single gang electrical box.
- Flush mounts to the wall over a 4 X 4 or two gang electrical
box.
- Small, low profile, attractive unit in a white plastic case. It
looks similar to a thermostat.
- Detector alarms at multiple levels of exposure to carbon
monoxide based on time weighted averages of the gas present.
- Inexpensive, easy to install. Microcomputer control allows
mostly automatic operation.
- Test & Reset switch conducts internal tests and actuates relays.
- Visual display:
- GREEN - Normal operation.
- FLASHING AMBER - Trouble Contact
your installer
- RED - Danger! Move to fresh air
(hazardous condition is present.)
- Solid state sensor. No maintenance or periodic sensor
replacement needed.
- SPDT Relay to connect to Alarm Control Panels or switch external
alarm devices.
- Normally closed SPST Trouble relay provides means for
system-wide supervision.
- Size 4 ½ X 5 X 1 5/ 8 inch
-
|
Voltage: |
12-24 VDC or 13-24 VAC (50-60
Hz) |
|
|
SPDT Alarm Relay |
Current (standby): |
45 ma @ 12V, 31 ma @ 24V |
|
|
SPST Trouble Relay |
Current (alarm,CM-15): |
62 ma @ 12V, 45 ma @ 24V |
|
|
